复合IMC土壤固结系统; HM-5480.3F

洪堡的hm - 5480.3F Conmatic IMC is an automatic controller for performing incremental, CRS, and Swell tests. Automatic testing will free up technicians for other tasks and reduce man power requirements of the testing procedures by more than half. IMC allows consolidation tests in the following modes of operation; constant load/stress, 恒定加载速率, 应变速率不变.

One Conmatic IMC automated system can replace the production of several manual machines:

• 增量根据(ASTM D2435)方法B, where successive load increments are applied through 100% primary consolidation.
• Constant rate of strain (ASTM D4186) with controlled back pressure.
• 土壤膨胀或崩塌(ASTM D4546 & B.

Once a sample has been placed onto the test platform and the test conditions set, Conmatic IMC执行所有整合测试, 包括进入下一个压力等级, 没有操作员协助.
The system automatically moves through the different test parameters specified by the user with incremental consolidation tests typically being completed in 24 to 48 hours. Tests can be done with our NEXT PC software or without it if a PC is not available. The 洪堡 NEXT software with the hm - 5100西南 Consolidation module uses sample deformation readings taken from the displacement transducer and load readings from the load cell to maintain a constant applied stress to the sample throughout the test. Testing data is recorded and displayed in real-time on the screen while test data is stored and calculations are performed automatically. 洪堡‘s NEXT software with the hm - 5100西南 Consolidation module provides:

• Live test data tabulation and live graphing capabilities (实时).
• Complete test reporting including all calculations and graphs required for testing.
• Review and exporting of tests using Microsoft Excel (CSV) format.
• Smart Test Function: automatically picks up where it left off if the test was not finished due to unexpected events.

The unique design of the Conmatic IMC system enables the user to connect multiple Conmatic IMC units to a single computer when connected via a lan网络.

计算机控制
NEXT软件和增强的整合模块, hm - 5100西南, 是包含在Conmatic IMC自动化机器中的. 该软件提供了强大的机器控制, 校准, data acquisition and report generation for those using a computer to control testing operations. 除了, operators have the ability to view and control testing operations from the controlling PC, while also providing report generating capabilities using the test-specific software module.
你是否在控制一个单, 或者多台机器, HM-5475和HM-5480 commatic IMC, 与NEXT测试软件一起使用, 为收购提供完整的解决方案, recording and presentation of testing data in data tabulation and graphic chart formats with the following:

• Machine control, and data acquisition via networked computer.
• Provides the ability to use 洪堡‘s Next Software's, advanced test-specific modules.
• Real-time graph chart and numerical display of tests via computer display.
• Effective sampling rate up to 50 readings per second.
• Stores unlimited tests with up to 3000 points per test.
• Up to 255 individual tests can be run simultaneously from a single PC.
• 提供高级绘图功能.
• 提供全单元定制.
• 报表可以导出为Excel或CSV文件, 如果需要, and 洪堡 can provide custom integration/export solutions for LIMS, EQuIS, “嘉, 也.
• Stand-Alone reports are available in Excel (CSV) format.

hm - 4151a -空气/水气囊气缸
The 洪堡 空气/水气囊气缸 is used to deliver pressurized water to the CRS cell. The bladder acts as a reservoir and interface between the compressed air, 用作压力源, 还有水, which is used as the pressurizing medium for the sample. The cylinder will operate continuously to a maximum pressure of 150 psi (1000 kPa). It is constructed of anodized aluminum top and bottom plates, acrylic cylinder, and a Viton bladder.

HM-4145压力控制器-手动
The HM-4145 Stand-alone Pressure Controller and readouts for UU (Unconsolidated Undrained) triaxial & CRS压力应用. 它可以与hm - 4151 a一起使用. 控制包括:数字读出压力表, 压力调节器, 供水和压力出口. 最大工作压力为150psi (1000kpa).